Danfoss VLT DriveMotor FCP 106 Programming Manual page 65

Parameters
6-92 Terminal 42 Digital Output
Option:
[0] No operation
[1] Control Ready
[2] Drive ready
[3] Drive ready/remote control
[4] Standby / no warning
[5] Drive running
[6] Running / no warning
[7] Run in range/no warning
[8] Run on ref/no warning
[9] Alarm
[10] Alarm or warning
[12] Out of current range
[13] Below current, low
[14] Above current, high
[16] Below speed, low
[17] Above speed, high
[19] Below feedback, low
[20] Above feedback, high
[21] Thermal warning
[22] Ready, no thermal warning
[23] Remote, ready, no thermal
warning
[24] Ready, Voltage OK
[25] Reverse
[26] Bus OK
[32] Mech brake ctrl
[35] External Interlock
[36] Control word bit 11
[37] Control word bit 12
[41] Below reference, low
[42] Above ref, high
[45] Bus Control
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[70] Logic rule 0
[71] Logic rule 1
[72] Logic rule 2
[73] Logic rule 3
[74] Logic rule 4
[75] Logic rule 5
[80] SL digital output A
®
VLT DriveMotor FCP 106 and FCM 106 Programming Guide
Function:
Select the function of
Terminal 42 as an analog
current output. See also
6-90 Terminal 42 Mode. See
parameter 5-40 Function
Relay for description of the
choices.
MG03N102 - Rev. 2013-12-02
6-92 Terminal 42 Digital Output
Option:
[81] SL digital output B
[82] SL digital output C
[83] SL digital output D
[160] No alarm
[161] Running reverse
[165] Local ref. active
[166] Remote ref. active
[167] Start command activ
[168] Drive in hand mode
[169] Drive in auto mode
[193] Sleep Mode
[194] Broken Belt Function
[196] Fire Mode
[198] Drive Bypass
6-93 Terminal 42 Output Min Scale
Range: Function:
0 % [0 - 200 Scale for the minimum output (0 or 4 mA) of
*
%] the analog signal at Terminal 42. Set the value
to be the percentage of the full range of the
variable selected in 6-91 Terminal 42 Analog
Output.
6-94 Terminal 42 Output Max Scale
Range: Function:
100 [0 - Scale for the maximum output (20 mA) of the
% 200 scaling at Terminal 42. Set the value to be the
*
%] percentage of the full range of the variable
selected in 6-91 Terminal 42 Analog Output.
Current
(mA)
20
0/4
0% Analogue
output
Min Scale
par. 6-93
Illustration 4.14 Output Max Scale
6-96 Terminal 42 Output Bus Control
Range:
0 [0 - 16384 ]
*
6-98 Drive Type
Range:
0 [0 - 0 ]
*
Function:
Analogue Variable
100%
Output for
Max Scale output
par. 6-94 example:
Power
Function:
Function:
63
4 4