Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual page 341

Reference Manual
00809-0100-4530
Table A-27: Rosemount 5303 Level for Solids Ordering Information
Options (include with selected model number)
Display
M1 Integral digital display
Communication
HR7 4–20 mA with digital signal based on HART 7 protocol
Hydrostatic testing
(12)
P1 Hydrostatic testing
Factory configuration
C1 Factory configuration (Configuration Data Sheet required with order, available at
Rosemount)
Alarm limit configuration
C4 Namur alarm and saturation levels, high alarm
C5 Namur alarm and saturation levels, low alarm
C8 Low alarm
(14)
Welding documentation
Q66 Welding Procedure Qualification Record Documentation
Q67 Welder Performance Qualification Record
Q68 Welding Procedure Specification
Safety certifications
QS Prior-use certificate of FMEDA Data. Only available with HART 4-20 mA output (output code H).
QT Safety-certified to IEC 61508 with certificate of FMEDA data. Only available with HART 4-20 mA
output (output code H).
Special certifications
Q4 Calibration Data Certification
(15)
Q8 Material Traceability Certification consistent with ISO10474-3.1:2013 / EN10204-3.1:2004
QG GOST Primary Verification Certificate
Dye penetration test certificate
Q73 Certificate of Liquid Penetrant Inspection
Positive material identification certificate
Q76 Positive Material Identification Certificate of Conformance
Installation options
LS Long stud 9.8 in (250 mm) for flexible single lead probe to prevent contact with wall/nozzle.
Standard stud length is 3.9 in (100 mm) for probes 5A and 5B; 5.9 in. (150 mm) for probes 6A and
6B
BR 316L Mounting Bracket for 1½-in. NPT Process Connection (RA) (see
Reference Manual
(13)
(standard Rosemount alarm and saturation levels)
Specifications and reference data
(continued)
Emerson.com/
Figure A-36)
April 2019
★
★
★
★
★
★
★
★
★
★
★
★
★
★
341