Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual page 166

Operation
April 2019
6.4.2 View measurement data in AMS Device Manager and
handheld communicator
Current measurement data of the primary variables are presented on the Overview
screen. To view all current measurement values, do the following:
Procedure
1. Select Service Tools → Variables.
2. HART
6.4.3 View measurement data in DeltaV
Procedure
1. Right-click the transmitter icon and choose the Properties option.
2. Select the Transducer1100 block.
3. Select the desired group of measurement values to view.
166
Figure 6-3: Presentation of Analog Output Value in Rosemount Radar Master
®
: Select Mapped Variable, Process, Device, or Signal Quality.
™
F Fieldbus: Select Product Variables, Interface Variables or Signal
OUNDATION
Quality Metrics.
• To view level values such as Level and Distance, select the Product Values tab.
• To view interface measurement values, select the Interface Values tab.
Reference Manual
00809-0100-4530
Rosemount 5300 Level Transmitter