Connect Wiring And Power Up - Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual

Reference Manual
00809-0100-4530
4.8.3 Wiring diagram
Figure 4-15: Wiring Diagram for F
A. Handheld communicator
B. Approved IS barrier (for Intrinsically Safe installations only)
C. F
D. Power supply
Note
Rosemount 5300 Level Transmitters with flameproof/explosion-proof output have a built-
in barrier; no external barrier needed.
Note
For intrinsically safe installations, make sure the instruments in the loop are installed in
accordance with intrinsically safe field wiring practices.
Note
For explosion-proof/flameproof installations, make sure the transmitter is grounded to the
internal ground terminal inside the terminal compartment in accordance with national
and local electrical codes.
4.9

Connect wiring and power up

Procedure
1.
2. Remove the terminal block cover.
Reference Manual
Fieldbus modem
OUNDATION
Make sure the power supply is switched off.
Fieldbus
OUNDATION
Electrical installation
April 2019
107