Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual page 120

Configuration
April 2019
4. Connect the power wires (or cycle power) to the transmitter.
5. Wait 20 seconds, and then search for and connect to device.
120
f) Select OK.
a) Select Device → Search.
b) Make sure HART address 1 is being scanned (also see
communication when multiple 5300/5400 Modbus units are on the
c) Select Start Scan.
Reference Manual
00809-0100-4530
Establish
bus).
Rosemount 5300 Level Transmitter