Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual page 296

Specifications and reference data
April 2019
Table A-13: Process Connection with Plate Design
Standard Bolting material
ASME Stainless steel
SA193 B8M Cl.2
EN, JIS EN 1515-1/-2
group 13E0,
A4-70
Table A-14: Alloy C-276 Flanges
Standard Bolting material
ASME UNS N10276
EN
Table A-15: Duplex 2205 Flanges
Standard Bolting material
ASME A193 B7 or A320
L7
EN Bumax
A.2.14 Interface measurements
The Rosemount 5302 is a good choice for measuring the interface of oil and water, or
other liquids with significant dielectric differences.
It is also possible to measure interface with a Rosemount 5301 in applications where the
probe is fully submerged in the liquid, using the submerged probe mode.
296
Gasket
Standard/HP/
HTHP/C
Soft (1a) with min.
thickness 1.6 mm
Soft (EN 1514-1)
with min.
thickness 1.6 mm
Gasket
Standard/HP/
HTHP
Soft (1a) with min.
thickness 1.6 mm
Soft (EN 1514-1)
with min.
thickness 1.6 mm
Gasket
Standard/HTHP
Soft (1a) with min.
thickness 1.6 mm
®
88 Soft (EN 1514-1)
with min.
thickness 1.6 mm
Flange material
HP/HTHP/C
Spiral wound Stainless steel
gasket with A182 Gr. F316L/
nonmetallic filler F316 and EN
(1b) 10222-5-1.4404
Spiral wound
gasket with
nonmetallic filler
(EN 1514-2)
Flange material
HP/HTHP
Spiral wound SB462 Gr. N10276
gasket with (solution
nonmetallic filler annealed
(1b) condition) or
SB575 Gr. N10276
Spiral wound
(solution
gasket with
annealed
nonmetallic filler
condition)
(EN 1514-2)
Flange material
HP/HTHP
Spiral wound Duplex stainless
gasket with steel SA/A182 F51
nonmetallic filler and
(1b) EN10222-5-1.446
2 or SA/A240 Gr.
Spiral wound
S31803 and
gasket with
EN10028-7-1.446
nonmetallic filler
2
(EN 1514-2)
Reference Manual
00809-0100-4530
Hub material
SB574 Gr. N10276
or SB164 Gr.
N04400
Hub material
SB574 Gr. N10276
Hub material
Stainless steel
SA479M S31803
and EN
10272-1.4462
Rosemount 5300 Level Transmitter