Adjusting The Main Drive Chain And The Drive Motor - Kodak X-Omat M43 PROCESSOR Service Manual
Hide thumbs
Also See for X-Omat M43 PROCESSOR:
- Diagnostics manual (46 pages) ,
- Operator's manual (40 pages)
Table of Contents
Advertisement
SERVICE MANUAL
Adjusting the MAIN DRIVE CHAIN and the DRIVE MOTOR
Warning
Moving parts
[1] Check that:
• PROCESSOR is de-energized
• main power is disconnected
• TOP COVER is removed
[2] Remove:
• DRIVE SIDE ACCESS PANEL
• BACK ACCESS PANEL
[3] Loosen the 3 MOUNTING SCREWS for the DRIVE MOTOR.
Adjusting the MAIN DRIVE CHAIN
Figure 42
0.20 cm
.080 in.
CHAIN
SPROCKET
SETSCREW
50
MOUNTING
SCREW (3)
DRIVE
MOTOR
BRACKET
H130_0188HCA
H130_0188HA
September 1995 – 981090
Advertisement
Table of Contents
