Removing The Dryer Blower - Kodak X-Omat M43 PROCESSOR Service Manual
Hide thumbs
Also See for X-Omat M43 PROCESSOR:
- Diagnostics manual (46 pages) ,
- Operator's manual (40 pages)
Table of Contents
Advertisement
SERVICE MANUAL
Removing the DRYER BLOWER
[1] Remove the following parts from STUD 1 on the DRYER BLOWER:
• NUT
• GROUND WIRE
• 2 STAR WASHERS
[2] Remove the following parts from STUD 2 of the DRYER BLOWER:
• NUT
• LOCK WASHER
• WASHER
[3] Carefully, remove the DRYER BLOWER by moving it toward the Non-Drive side of the PROCESSOR. Note
the routing of the wires.
Removing Parts from the STUDS 1 and 2 of the DRYER BLOWER
Figure 37
DRYER BLOWER BRACKET
DRYER
BLOWER
STUD 2
44
LOCK WASHER
WASHER
STUD 1
NUT
GROUND
WIRE
STAR WASHER (2)
September 1995 – 981090
NUT
H130_0065BCA
H130_0065BA
Advertisement
Table of Contents
