Overview Of The Processor - Kodak X-Omat M43 PROCESSOR Service Manual

SERVICE MANUAL
Description of Tool
RED GREASE
MOTOR OIL
SPRING GAUGE
ROLL PIN PUNCH
BOTTLE BRUSH
HEAT SINK COMPOUND
PROM EXTRACTION TOOL
PIN EXTRACTION TOOL
CLAMP

Overview of the PROCESSOR

Many of the procedures contained in this manual require that the PROCESSOR be de-energized before the procedure
is begun. Many of the procedures also require that the TOP COVER and 4 ACCESS PANELS be removed from the
PROCESSOR before the procedure is begun. For your convenience, illustrations showing the location of the TOP
COVER, ACCESS PANELS, MAIN CIRCUIT BREAKER, and other major components appear on the following
pages.
6
Tool Number
TL-4156
TL-2244
TL-3154
TL-1388
TL-4833
TL-2192
TL-4430
TL-2105
TL-2170
September 1995 – 981090