9J-18 Hood / Fenders / Doors:
Front Side Door Outside Handle
Replacement
Removal Procedure
1. Remove the door handle bolt cap.
2. Remove the door handle screw through the door
shut face.
3. Remove the door handle cap.
4. Remove the door handle by sliding rearward and
pulling away from the door.
5. Remove the gasket, if necessary.
Installation Procedure
1. Install the gasket, if necessary.
2. Install the handle by placing into position and sliding
rearward ensuring to engage the outside handle
lever.
3. Install the door handle cap.
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
4. Install the door handle screw through door shut face.
Tightening torque
Tighten the screw to 8 N⋅m (71 lb in).
5. Install the door handle bolt cap.