Rear Side Door Window Channel; Replacement - Suzuki XL7 2007 Service Manual

Hide thumbs Also See for XL7 2007:

Table of Contents

9J-30 Hood / Fenders / Doors:

Installation Procedure

Refer to "Fastener Notice: " in Cautions and

1. Install the window run channel seal to the door

header flange, starting from the rear corner.

Tightening torque

Tighten the bolts to 8 N⋅m (71 lb in).

2. Install the front door window weatherstrip run

channel assembly. Refer to "Front Side Door

Window Channel Replacement".

3. Install the front door frame applique. Refer to "Front

Door Frame Applique Replacement: ".

4. Install the outside rearview mirror. Refer to "Mirror

5. Install the front door window. Refer to "Front Side

Door Window Replacement: ".

Rear Side Door Window Channel

Removal Procedure

1. Lower the rear door window.

2. Remove the rear door trim panel. Refer to "Rear

Side Door Trim Panel Replacement".

3. Remove the inner belt seal. Refer to "Rear Door

Window Belt Inner Sealing Strip Replacement".

4. Starting at one end, carefully pull the window

weatherstrip run channel assembly from the door

Installation Procedure

1. Align the notch in the window weatherstrip seal to

the fixed window post and press the weatherstrip

onto the window flange.

a. Press the weatherstrip run channel onto the door

b. Ensure the channel is fully secured into the

upper corners of the door frame.