SECONDARY SHUTTER VALVE ACTUATOR
SECONDARY SHUTTER VALVE (SSV) ACTUATOR INSPECTION
1. Disconnect the vacuum hose of the SSV actuator.
2. Install the vacuum pump to the SSV actuator.
3. Verify that the rod moves as indicated in the table below when gradually applying a vacuum to the SSV
actuator.
If there is any malfunction, replace the intake manifold. (See INTAKE MANIFOLD
•
REMOVAL/INSTALLATION .)
Rod movement
Vacuum
(kPa {mmHg, inHg})
−3.6 {−27.0, −1.1} or more
−27.9 {−209.2, −8.2} or less Fully pulled
1.2 {9.0, 0.4} or more
Rod movement
Starts to move
Fully returned
(w)
Engine Specifications
Page 99