Mazda RX-8 Manual page 278

Oil Pan Component Removal Note
1. Remove the oil pan using the separator tool.
Oil Pan Component Installation Note
CAUTION:
Apply the silicon sealant in a single, unbroken line around the whole perimeter.
•
Install the oil pan within 5 min after applying the silicone sealant.
•
Using bolts with the seal adhering could cause cracks in the housing.
•
1. Completely clean and remove any oil, dirt, sealant or other foreign material that may be adhering to the
housing and oil pan.
2. When reusing oil pan installation bolts, clean any old sealant from the bolts.
3. Apply silicone sealant to the areas shown in the figure.
Bead thickness
o
2.56.5 mm {0.100.26 in}
(w) Engine Specifications
Page 41