Mazda RX-8 Manual page 257

Engine-driven accessories operation
•
18. Perform the on-road test and verify that there is no vibration or noise.
Oil Hose Removal Note
1. Remove the clip as shown in the figure and disconnect the oil pipe.
CAUTION:
Catch the remaining engine oil in the oil cooler using a plate pipe to prevent spillage.
•
Power Plant Frame, Crossmember Bolt Removal/Installation Note
1. Secure the engine, transmission, and crossmember component using an engine lifter.
NOTE:
When installing the power plant frame, tighten the tightening bolts and nuts temporarily at this
•
time, and after installing all parts, adjust the transmission installation positions referring to
'Power Plant Frame Installation Note' and then tighten them completely. (See Power Plant Frame
Installation Note )
(w) Engine Specifications
Page 20