OIL FILTER
OIL FILTER REPLACEMENT
WARNING:
Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious
•
injury.
Continuous exposure to USED engine oil has caused skin cancer in laboratory mice. Protect your skin
•
by washing with soap and water immediately after working with engine oil.
CAUTION:
When removing the oil filter, cover up the surrounding area with cloth to prevent oil in the filter from
•
spilling on other parts.
In case you spill the engine oil on the exhaust system, wipe it off completely. If you fail to wipe the
•
spilled engine oil, it will produce fumes because of the heat.
NOTE:
Since two types of the oil filters have been adopted, make sure to choose the appropriate procedure
•
according to the oil filter manufacturer (Tokyo Roki or Denso) indicated on the label of the filter.
Tokyo Roki
1. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION .)
2. Remove the oil filter using the SST.
3. Clean the installation surface of the oil filter.
4. Apply engine oil to the O-ring of the new oil filter.
5. When the O-ring contacts the oil filter installation surface, turn the filter another one rotation by hand.
(w)
Engine Specifications
Page 33