Fig. 5: Identifying Belt Length
Courtesy of MAZDA MOTORS CORP.
POWER STEERING OIL PUMP DRIVE BELT
1. Remove the generator and A/C drive belt. (See GENERATOR AND A/C DRIVE BELT.)
2. Remove the power steering oil pump drive belt.
1. Install the SST between the power steering oil pump drive belt and the power steering oil pump
pulley.
NOTE:
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Hold the SST by hand until it is lodges between the power
steering oil pump pulley and power steering oil pump drive belt.
Fig. 6: View Of SST Between Power Steering Oil Pump Drive
Belt & Power Steering Oil Pump Pulley