Introduction; General Introduction; Definitions / Explanations - Panasonic Firetracker FT1020G3 CIE Technical And Programming Manual

1

Introduction

1.1

General introduction

FT1020G3 Technical / Programming Manual is a
interest for planning engineers as well as service / commissioning engineers.
This document should be read in conjunction with FT1020G3 Operation Manual since most
of the information in one of the documents is not found in the other document and vice
versa.
It should also be read in conjunction with the FT1020G3 connection diagrams according to
the drawings / connection diagram list on Table 20 page 183.
When planning a fire alarm installation, the Australian standard AS1670.1 requirements
must be followed. Detector type, detector coverage area, detector spacing and special
applications in the building, etc. are concerns for the planning engineers and are not
covered in this document.
Due to continual development and improvement, different S/W versions are to be found.
This document is valid for S/W version V2.2.x. On the date / revision date of the document
x = 0.
A product may be one of the following:

FT1020G3 CIE Configured for 510 or 1020 alarm points and with or without printer.

FT1020G3 CIE without front configured for 510 or 1020 alarm points.

FT1020G3 CIE with 2 x 5010 and one front to increase the number of COM loops
to 8 and optional I/O matrix board applications.
Hardware H/W:
A H/W (e.g. a printed circuit board) has:

a part number (e.g. 5010)

a product name (e.g. FT1020G3 Main Board 512 alarm points)

a PCB number (e.g. 9290-2B) and can also have a configuration (e.g. CFG: 2)
and a revision (e.g. REV: 1)

sometimes a S/W
Software S/W:
A S/W has:

A version number (e.g. V2.2.x)

Sometimes additional information, such as Convention (different functions /
facilities), Language, etc. added.
PC S/W:
A PC S/W is a program used for programming, commissioning, etc. e.g. EBLWin. It has a
version number e.g. V2.2.0.
1.2

Definitions / Explanations

Definitions / explanations / abbreviations / etc. frequently used, refer to FT1020G3
operation manual.
Refer to FT1020G3 Operation Manual for more details.
Technical/Programming Manual
document with information of special
9
FT1020G3 Rev 2.2.1