Table of Contents
Advertisement
Technical/Programming Manual
FT1020G3 Rev 2.2.1
4.2
FT1020G3 CIE Layout
The FT1020G3 available in many configurations depending on the number of options fitted
in the CIE.
Figure 4 The FT1020G3 Control Unit, with printer
The FT1020G3 control and indicating equipment (CIE) shown in Figure 4 is housed in a
powder coated metal cabinet, colour is oyster. The cabinet has an inner and outer door.
The outer door is fitted with 003 keys to provide access level 1 and is made of tinted high
impact plastic and allows easy viewing of all indicators and controls.
Access to the inner door is gained by opening the outer door which then provides access
to the inner door fixing screws. Opening the inner door allows access to the Control Unit
hardware for the purpose of maintenance or servicing
The fire brigade panel (FBP) forms integral part of the control panel (CP) as shown in
Figure 5 below, it is used by the fire brigade or fire services personnel to see which alarm
point(s) / zone(s) having activated fire alarm and to take required operational control of the
system. In the graphical display, the information displayed in the upper part is dependent
on how many alarm points / zones having activated fire alarm. In the middle part, the fire
alarms will be shown, i.e. one alarm point or one zone together with a user definable alarm
text (if programmed) plus some other information.
19
Advertisement
Table of Contents
