set alternative alarm algorithm for Analogue detector types 430x /440xx on / off
set 2-unit dependence function on / off
The properties for each Time channel (2-14) and each Day of the week (Monday –
Sunday + National Holiday) have to be set for the channels respectively
Left: The "Time channel 2" dialog box without any programming done.
Right: One time interval is programmed for Monday (time channel 2 is "on" 07:00 – 16:00).
Name: "Time channel n" is default. Normally not changed but an informative text can be
added (e.g. office hours).
Monday: To set the time channel for this day, follow these numbered steps in Figure 51.
Figure 50 Time channels configuration
Figure 51 Time Channel Setting
152
Technical/Programming Manual
FT1020G3 Rev 2.2.1