22.2.9
External time channels
To the right of the tree view the "External time channels" tab is available.
This is a list, for the whole system, showing all external time channels and their properties.
The list can be sorted by clicking the column header respectively.
Double click an external time channel row to open its dialog box.
You can print and save what you see in the list. A filter function is available.
22.3
The System menu
22.3.1
Properties
dialog box opens as in
The same
22.3.2
Time channels
Time channels Always off and Always on cannot be edited.
The time channels 2-14 are Controlled by the built=in RTC (real time clock). Up to five
intervals (interval = one time on / one time off) can be set for each day in time channel 2-
14.
Time channels 1-14 can be used to:
disable and re-enable alarm points / zones
set Alert Annunciation on / off
disable, re-enable and activate programmable control outputs
Technical/Programming Manual
, page 142
Figure 46
.
151
FT1020G3 Rev 2.2.1