Table of Contents
Advertisement
2.3
Documents
The following documents are available:
Technical / Programming Manual (this document)
Operation Manual
Connection diagrams
Information found in one document is normally not to be found in another document, i.e.
the documents complement each other.
are available on Brooks web site: http://www.brooks.com.au.
Some important information might be exist in the operation manual as well as this
manual e.g. specifications / limitation, SSD and software download, etc.
2.4
Applications
The FT1020G3 system is intended for small, medium and large size installations. The
intelligent Control Units offer the system designer and end user a technically sophisticated
range of facilities and functions. Programming (PC software EBLWin and TLON Manager)
and commissioning of the Control Units / system is very easy.
Start with one Control Unit and then when it is required, add more units. The TLON network
makes it possible to install the Control Units in one building or in many buildings.
Separate documents are available for TLON Manager, Web-server, etc.
2.5
PC software (S/W)
The following PC programs are used together with the FT1020G3 system. For standalone
FT1020G3, the TLON Manager is not used.
2.5.1
EBLWin
The PC program EBLWin is used for programming and commissioning of one or more
Control Units, i.e. to:
Autogenerate, i.e. to identify the units connected on a COM loop and make default
settings, which can be edited, saved and used as site specific data (SSD).
Create, download and backup (upload) of site specific data (SSD)
Download new system software version, settings, conventions, configurations,
Control Unit & system properties, etc.
Create and download the user definable alarm text messages shown in the display
in the Control Units and other Display Units (1728 & 1736).
Display the fire alarms, faults and disablements as well as reset, acknowledge and
re-enable, etc.
Configure the Web-server II (5098); create and download / make a backup (upload)
of the configuration data as well as download of Web-server software.
The EBLWin must have the same version number as the system software EBL512 G3
version number e.g. 2.2.x and 2.2.x respectively. Only x may be different, it indicates a
small correction and is not required to be the same.
Old SSD files can be opened in a newer (higher) version of EBLWin, saved, edited and
thereafter downloaded to an FT1020G3 units with the corresponding version.
EBLWin key 5094 is a USB dongle that is required on your PC in order to gain access to
log on and download SSD files.
Technical/Programming Manual
Product Leaflet for FT1020G3 and other units
12
FT1020G3 Rev 2.2.1
Advertisement
Table of Contents
