Eblwin Menus; The File Menu; New; Open - Panasonic Firetracker FT1020G3 CIE Technical And Programming Manual

22

EBLWin menus

When EBLWin is opened, the most recent used / saved (MRU) SSD file will be opened if
the checkbox "Open MRU at startup" is selected in the "EBLWin Settings" (Options) dialog
box, else a new system will be opened.
Note: If the MRU installation is an FT128 system, a new FT1020G3 system has to be
selected via menu "File I New", see below.
22.1

The file menu

22.1.1

New

To open a new installation. The type of system has to be selected.
System EBL512 G3 = FT1020G3 (default)
System EBL128 = FT128
22.1.2

Open

Used to open an installation via a standard Windows dialog box "Open". The following can
be opened:

EBLWin file (*.ebl)

WinG3 file (*.WinG3)

Win128 file (*.Win128)
22.1.3

Import from Win512

To open an SSD file via a standard windows dialog box "Open".
Note: Only valid for version 2.7.x.
File name: Win512 file (*.512).
22.1.4

Report

All reports are exported as a *.htm file that can be saved for later use as a commissioning
document. An example of this report is shown in Figure 47 next page.

Installation Document, All System properties, Control Unit properties, etc. will be
saved in a file (EBLWin Installation Document.htm), via a standard Windows dialog
box "Save As".
Technical/Programming Manual
146
FT1020G3 Rev 2.2.1