Introduction - Panasonic EBL128 User Manual

Panasonic Eco Solutions Nordic AB
MEW01624 Rev: -
1

Introduction

This document is intended to be used for the daily duties like
disablements / re-enablements, zone tests, etc. in the EBL128 system.
The document describes the main menus (incl. the sub menus) valid
for user level / type "Building officer".
Due to continual development and improvement different S/W
versions can be found. This document is valid for EBL128 S/W
version 2.0.x. (x=0 at the "Date of issue" or "Date of revision".)
This document is less detailed and shorter than the Operating
Instruction, MEW01623.
NOTE! In the left margin are pictures of the buttons / keys used in
the menu respectively. Each picture is only shown one time in each
menu – not each time the button / key should be used.
A User name and a Password is required to Log on to the control
unit, i.e. for access to the menu system.
NOTE! In case of fire alarm activated in the system, you have access
to the special menus X1-X9 without any log on to the control unit.
The PC program EBLWin is used for commissioning, etc. User
names and Passwords can be added and edited via this program.
1
User levels 1, 2A, 2 B and 2C according to EN54-2.
2
The menus available are depending on the user level / type for the user
respectively, see chapter "Log on to the Control Unit (c.i.e.)", page 4.
EBL128 version 2.0.x, Daily user's manual
1
2
3