Table of Contents
Advertisement
23
Download SSD
Note: An EBLWin USB key must be used to communicate with the control panel and
download the SSD using EBLWin V2.x.x.
The PC program EBLWin is used for creating the Site Specific Data (SSD) and to download
it to the FT1020G3 Control Unit(s), the Web-server and/or the connected Display Units
1728, 1736.
The EBLWin key is a protection USB device required to log on to the Control Unit, it has a
unique number. The EBLWin key identification number will be registered in the control
panel event log with the date and time stamp for every SSD download performed in the
control panel.
When the installation is ready, i.e. all units connected and the power is turned on, the SSD
download can take place. When a number of Control Units are connected in a TLON
network, the network has to be running before the SSD download can take place.
The PC has to be connected to the USB port (type "B") in one Control Unit. Start EBLWin
and open the required installation. Log on to the Control Unit via the PC (EBLWin).
Note: No password / access code is required to log on to the Control Unit, instead an
EBLWin key is required. This key is plugged in a USB-port in your PC.
In EBLWin (menu "Tools" | "Download SSD..."), you can select the unit(s), i.e. the Control
Units as well as the Display Units and Web-server, to which the SSD is to be downloaded.
After the SSD download the Control Unit will restart. A number of faults might then be
generated, e.g. due to not connected units. This will cause "heavy traffic" on the network,
which might affect (delay) the SSD download to the other units.
In EBLWin (menu "Tools" | "Download SSD..."), select the control unit(s). SSD can also be
downloaded to the Web-server and connected Display Units, if the check box "Download
display units" and "Download Webserver SSD" respectively is marked.
Progress Bar
Click "Start" to start the download. The progress bar will indicate the download status for
each control unit.
The download is not completed until the following box is shown:
Technical/Programming Manual
162
FT1020G3 Rev 2.2.1
Advertisement
Table of Contents
