Mounting Plates; Mounting Plate For 19" Mounting Rack - Panasonic Firetracker FT1020G3 CIE Technical And Programming Manual


Power supply, see chapter "Power supply", page 177. Connections and more
information, see drawing 765.

Space for up to six optional expansion boards (458x) mounted on two expansion
boards mounting kits.

Space for different brigade (ASE) interface brackets e.g. Romtec, Tyco ASE, etc.

Depending on the system requirements and the space available, the following
options can be added to FT1020G3:
 Occupant Warning System, 60W, 120W or 250W
 AS1668 Fire Fan Control Card
 Zone status indications and control card
 Gaseous Extinguishing System
 NZ Fire Brigade mimic display
 MDH control
See following chapters for more and detailed information.
4.2.1

Mounting plates

The FT1020G3 control panels are equipped with different front and rear mounting plates
to suit mounting of compatible equipment, optional application boards and the optional
printer.
4.2.2

Mounting plate for 19" mounting rack

When FT1020G3 units are required to be mounted in a 19" mounting rack or cabinets, the
standard mounting plates can be replaced with 19" rack mounting plates.
 Six x 24 V
power supply outputs for Web-server II (1598), routing
DC
equipment and external equipment requiring battery backed supply.
Connections and more information, see Drawing F732-01.
 Two non-programmable relay outputs for routing equipment (Fire alarm
output for Fire Brigade TX and Fault output for Fault TX). For connections
and more information, see drawing F732-02.
 Space and connectors for two TLON connection boards 5090, See
drawing F726 and F732-03.
 RS485 and 24V
DC
connections and more information, see drawing F765.
 Connector for expansion boards (4580, 4581 & 4583), for connections and
more information, see drawing F728, F729 and F731.
 Connectors for Web-server (1598), for connections and more information,
see drawing F734.
 Connectors for Battery charger DC in and battery termination.
 Switched mode supply, 230V
 Space and connection cables for two Sealed Lead-Acid backup batteries.
 Battery temperature sensor.
Technical/Programming Manual
outputs for Display Units (1728 & 1736), for
/ 24V (150 Watt).
AC DC
21
FT1020G3 Rev 2.2.1