Introduction - Panasonic MEW01349 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01349 Rev: -
1
Operating Instructions Fire alarm system EBL512 G3, V1.1.x

Introduction

EBL512 G3 Operating Instructions is a document intended to be used
by the end-user and the fire brigade personnel as well as service /
commissioning engineers.
Due to continual development and improvement, different S/W
versions are to be found. This document is valid for S/W version
1.1.x. On the date / rev date of this document x = 0.
Since the EBL512 G3 control unit (c.i.e.) is produced for many
countries the look, the texts, the functions, etc. might vary.
Products
Consists of one or more parts (HW) according to a Product Parts
List. A product has:
 a type number
5000 EBL512 G3 c.i.e. Configured for 128, 256 or 512 alarm
points and with or without printer depending on article number.
5001 EBL512 G3 c.i.e. No front panel and no Plexiglas in the
door. Configured for 128, 256 or 512 alarm points depending
on the article number.
 an article number is often the same as the type no. but a country
code can be added (e.g. SE for Sweden). If also the letters PRT
are added in the article number the product comes with a printer.
If digits are added to the article number they are showing the
number of alarm points configured (e.g. 5000PRTSE-128).

a product name (e.g. EBL512 G3 CU, 128 alarm points, with
printer)
HW
A HW (e.g. a printed circuit board) has:

a type number (e.g. 5010)

an article number, often = the type no. and sometimes is a
country code added (e.g. 5010SE)

a product name (e.g. Main Board 128 alarm points)

a p.c.b. number (e.g. 9290-3B) and can also have a configuration
(e.g. CFG: 2) and a revision (e.g. REV: 2)

sometimes a S/W
S/W
A S/W has:

a version number (e.g. V1.1.x)
6