Printer - Panasonic Firetracker FT1020G3 CIE Technical And Programming Manual

7

Printer

The FT1020G3 control panel can be fitted with an optional printer. It is mounted on the
front face plate behind the lockable door and is connected to the MMI board 5011. Refer
to drawing F725-01
When the printer is mounted, the checkbox "Printer" has to be ticked in the EBLWin "Control
Unit properties" dialog box.
The following can be printed:

Alarms (Fire alarms – including test mode alarms & Heavy smoke / heat alarms,
etc.)

Disablements, etc. via menus H4/U1 – U2

Detectors activating service signal via menu H4/U5

The event log via menu H4/U7

The Control Unit information / configuration via menu H4/U8

Activated Interlocking inputs via menu H9/C1
The printer only – not the mounting frame - is available as a spare part, type number 5058.
Technical/Programming Manual
49
FT1020G3 Rev 2.2.1