Subaru Impreza 2003 Service Manual page 1066

MECHANICAL
NOTE:
When separating the cylinder block, do not allow
the connecting rod to fall and damage the cylinder
block.
(5)
(1) Cylinder block
(2) Rear oil seal
32) Remove the rear oil seal.
33) Remove the crankshaft together with connect-
ing rod.
34) Remove the crankshaft bearings from cylinder
block using a hammer handle.
NOTE:
Do not confuse the combination of crankshaft bear-
ings.
Press the bearing at the end opposite to locking lip.
35) Draw out each piston from cylinder block using
a wooden bar or hammer handle.
NOTE:
Do not confuse the combination of piston and cylin-
der.
CYLINDER BLOCK
(1)
(4)
(3)
(3) Crankshaft
(4) Crankshaft bearing
ME(H4DOTC)-92
(2)
(4)
(1)
(5)
(5) Piston
ME-00143