Subaru Impreza 2003 Service Manual page 696

FUEL INJECTION (FUEL SYSTEMS)
11) Connect the PCV hose to intake manifold.
12) Connect the spark plug cords to the spark
plugs.
13) Install the power steering pump and tank on
brackets.
(1) Install the power steering tank on bracket.
(2) Connect the connector to the power steering
pump switch.
INTAKE MANIFOLD
(3) Tighten the bolts which install the power
steering pump on bracket.
Tightening torque:
22 N·m (2.2 kgf-m, 16.2 ft-lb)
FU-00141
(4) Install the power steering pipes onto intake
manifold protector RH.
FU-00020
(5) Install the front side V-belt. <Ref. to
ME(H4SO)-44, INSTALLATION, V-belt.>
(6) Install the resonator chamber.
<Ref. to IN(H4SO)-7, INSTALLATION, Resona-
tor Chamber.>
14) Connect the accelerator cable (A).
15) Connect the cruise control cable (B). (Model
with cruise control)
FU-00017
( A )
16) Install the air intake duct and air cleaner as-
sembly. <Ref. to IN(H4SO)-6, INSTALLATION, Air
Intake Duct.> and <Ref. to IN(H4SO)-5, INSTAL-
LATION, Air Cleaner Case.>
FU(H4SOw/oOBD)-20
( B )
FU-00139
FU-00255
FU-00912