Subaru Impreza 2003 Service Manual page 902

FUEL INJECTION (FUEL SYSTEMS)
9) Tighten the bolts which install the fuel injector
pipe onto intake manifold.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
• LH SIDE
• RH SIDE
INTAKE MANIFOLD
10) Tighten the two bolts which install the fuel pipes
on the left side of intake manifold.
Tightening torque:
4.9 N·m (0.5 kgf-m, 3.6 ft-lb)
FU-00044
11) Connect the evaporation hoses to the purge
valve. (Except Australia model)
NOTE:
Connect the evaporation hose as shown in the fig-
ure.
FU-00618
FU-00046
FU-00619
FU(H4DOTC)-24
(B)
(A)
(D)
(A) To fuel pipe ASSY
(B) To intake duct
(C) To purge control solenoid valve
(D) To intake manifold
FU-00043
(C)
FU-00365