FUEL INJECTION (FUEL SYSTEMS)
29.Fuel Sub Level Sensor
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near working area.
• Be careful not to spill fuel on floor.
1) Disconnect the ground cable from battery.
2) Lift-up the vehicle.
3) Drain fuel from fuel tank. Set a container under
vehicle and remove the drain plug from fuel tank.
4) Tighten the fuel drain plug.
Tightening torque:
26 N·m (2.7 kgf-m, 19.2 ft-lb)
5) Remove the rear seat.
FUEL SUB LEVEL SENSOR
6) Remove the service hole cover.
7) Disconnect the connector from fuel sub level
sensor.
8) Disconnect the fuel jet pump hose.
FU-00009
9) Remove the bolts which install the fuel sub level
sensor on fuel tank.
FU-00089
10) Remove the fuel sub level sensor.
FU-00089
FU(H4DOTC)-64
FU-00113
FU-00114
FU-00115
FU-00116