Subaru Impreza 2003 Service Manual page 898

FUEL INJECTION (FUEL SYSTEMS)
C: DISASSEMBLY
1) Remove the fuel pipe protector LH.
2) Remove the fuel pipe protector RH.
3) Remove the engine ground cable from intake
manifold.
4) Disconnect the connector from the throttle posi-
tion sensor (A), idle air control solenoid valve (B)
and manifold absolute pressure sensor (C).
INTAKE MANIFOLD
5) Disconnect the engine harness fixed by clip (D)
from intake manifold.
FU-00968
6) Remove the throttle body from intake manifold.
FU-00969
7) Disconnect the connector from fuel injector.
FU-00036
8) Disconnect the connector from tumble generator
valve actuator. (Except STi model)
FU-00037
FU(H4DOTC)-20
(A)
(C)
(B)
(D) (D)
FU-00038
FU-00013
FU-00615
FU-00616