Subaru Impreza 2003 Service Manual page 967

4. Intake Duct
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the intake
FU(H4DOTC)-14, REMOVAL, Intake Manifold.>
3) Remove the sensor, engine harness and fuel
pipe attached to intake manifold. <Ref. to
FU(H4DOTC)-20, DISASSEMBLY, Intake Mani-
fold.>
4) Remove the intake duct from intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
19 N·m (1.9 kgf-m, 13.7 ft-lb)
INTAKE DUCT
FU-00009
manifold. <Ref. to
IN-00010
IN-00010
IN(H4DOTC)-9
INTAKE (INDUCTION)