Enabling Ssh - Alcatel-Lucent 7210 SAS E OS System Management Manual

TACACS+ Configurations

Enabling SSH

Use the SSH command to configure the SSH server as SSH1, SSH2 or both. The default is SSH2
(
SSH version 2
disabled. This setting should not be changed while the SSH server is running since the actual
change only takes place after SSH is disabled or enabled.
CLI Syntax: config>system>security
The following displays a SSH server configuration as both SSH and SSH2 using a host-key:
A:sim1>config>system>security>ssh# info
----------------------------------------------
----------------------------------------------
A:sim1>config>system>security>ssh#
Page 68
). This command should only be enabled or disabled when the SSH server is
ssh
preserve-key
no server-shutdown
version ssh-version
preserve-key
version 1-2
7210 SAS-E OS System Management Guide