Alcatel-Lucent 7210 SAS E OS System Management Manual page 287

event-control
Syntax event-control [application [event-name | event-number]]
Context show>log
Description
This command displays event control settings for events including whether the event is suppressed or
generated and the severity level for the event.
If no options are specified all events, alarms and traps are listed.
Parameters application — Only displays event control for the specified application.
event-name — Only displays event control for the named application event.
event-number — Only displays event control for the specified application event number.
Output Show Event Control Output — The following table describes the output fields for the event
control.
7210 SAS-E OS System Management Guide
Default
All applications.
Default
All events for the application.
Default All events for the application.
Label
Application
ID#
Event Name
P
g/s
Logged
Dropped
The application name.
The event ID number within the application.
— An "L" in front of an ID represents event types that do not
L
ID#
generate an associated SNMP notification. Most events do generate a
notification, only the exceptions are marked with a preceding "L".
The event name.
CL — The event has a cleared severity/priority.
CR — The event has critical severity/priority.
IN — The event has indeterminate severity/priority.
MA — The event has major severity/priority.
MI — The event has minor severity/priority.
WA — The event has warning severity/priority.
gen — The event will be generated/logged by event control.
sup — The event will be suppressed/dropped by event control.
thr — Specifies that throttling is enabled.
The number of events logged/generated.
The number of events dropped/suppressed.
Event and Accounting Logs
Description
Page 287