Alcatel-Lucent 7210 SAS E OS System Management Manual page 290

Show Commands
A:ALA-1#
A:ALA-1# show log event-control ospf ospfVirtIfStateChange
=======================================================================
Log Events
=======================================================================
Application
-----------------------------------------------------------------------
=======================================================================
A:ALA-1#
file-id
Syntax file-id [log-file-id]
Context show>log
Description
This command displays event file log information.
If no command line parameters are specified, a summary output of all event log files is displayed.
Specifying a file ID displays detailed information on the event file log.
Parameters log-file-id — Displays detailed information on the specified event file log.
Output Log File Output — The following table describes the output fields for a log file summary.
Page 290
ID# Event Name
2001 ospfVirtIfStateChange
Label
file-id
rollover
retention
admin location
oper location
file-id
rollover
retention
file name
P
WA
The log file ID.
The rollover time for the log file which is how long in between parti-
tioning of the file into a new file.
The retention time for the file in the system which is how long the file
should be retained in the file system.
The primary flash device specified for the file location.
none — indicates no specific flash device was specified.
The actual flash device on which the log file exists.
The log file ID.
The rollover time for the log file which is how long in between parti-
tioning of the file into a new file.
The retention time for the file in the system which is how long the file
should be retained in the file system.
The complete pathname of the file associated with the log ID.
7210 SAS-E OS System Management Guide
g/s Logged Dropped
gen 0
Description
0