Alcatel-Lucent 7210 SAS E OS System Management Manual page 281

3
4
==========================================================
A:ALU-7210#
To configure an accounting policy for access ports, select a service record (for example, service-
ingress-octets). To change the record name to another service record then the record command with
the new record name can be entered and it will replace the old record name.
When configuring an accounting policy for network ports, a network record should be selected. When
changing the record name to another network record, the record command with the new record name
can be entered and it will replace the old record name.
If the change required changes the record from network to service or from service to network, then
the old record name must be removed using the no form of this command.
Only one record may be configured in a single accounting policy.
Note that collecting excessive statistics can adversely affect the CPU utilization and take up large
amounts of storage space.
The no form of the command removes the record type from the policy.
Default
No accounting record is defined
Parameters
record-name — The accounting record name. The following table lists the accounting record names
to
Syntax to file file-id
Context config>log>accounting-policy policy-id
This command specifies the destination for the accounting records selected for the accounting policy.
Default No destination is specified.
Parameters
file-id — The file-id option specifies the destination for the accounting records selected for this
7210 SAS-E OS System Management Guide
network-ingress-octets
network-ingress-packets
available and the default collection interval.
destination. The characteristics of the file-id must have already been defined in the
config>log>file context. A file-id can only be used once.
The file is generated when the file policy is referenced. This command identifies the type of
accounting file to be created. The file definition defines its characteristics.
If the to command is executed while the accounting policy is in operation, then it becomes active
during the next collection interval.
Values
1 — 99
Event and Accounting Logs
15
15
Page 281