Alcatel-Lucent 7210 SAS E OS System Management Manual page 251

Configuration Commands
Generic Commands
description
Syntax description string
no description
Context config>log>filter filter-id
config>log>filter filter-id>entry entry-id
config>log>log-id log-id
config>log>accounting-policy policy-id
config>log>file-id file-id
config>log>syslog syslog-id
config>log>snmp-trap-group
Description
This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
content in the configuration file.
The no form of the command removes the string from the configuration.
Default
No text description is associated with this configuration. The string must be entered.
Parameters
string — The description can contain a string of up to 80 characters composed of printable, 7-bit
shutdown
Syntax [no] shutdown
Context config>log>log-id log-id
config>log>accounting-policy policy-id
Description
This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics. The operational state of the entity is disabled as well
as the operational state of any entities contained within. Many objects must be shut down before they
may be deleted.
The no form of this command administratively enables an entity.
Default
no shutdown
Special Cases
Log Id — When a log-id is shut down, no events are collected for the entity. This leads to the loss of
7210 SAS-E OS System Management Guide
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string
must be enclosed within double quotes.
event data.
Event and Accounting Logs
Page 251