Alcatel-Lucent 7210 SAS E OS System Management Manual page 257

Parameters
cflash-id — Specify the primary location.
rollover
Syntax rollover minutes [retention hours]
no rollover
Context config>log>file file-id
Description This command configures how often an event or accounting log is rolled over or partitioned into a
new file.
An event or accounting log is actually composed of multiple, individual files. The system creates a
new file for the log based on the rollover time, expressed in minutes.
The retention option, expressed in hours, allows you to modify the default time to keep the file in the
system. The retention time is based on the rollover time of the file. The retention time is used as a
factor to determine which files should be deleted first as the file space becomes full.
When multiple rollover commands for a file-id are entered, the last command overwrites the previous
command.
Default rollover 1440 retention 12
Parameters
minutes — The rollover time, in minutes.
retention hours. The retention period in hours, expressed as a decimal integer. The retention time is
Log Filter Commands
filter
Syntax [no] filter filter-id
Context config>log
Description
This command creates a context for an event filter. An event filter specifies whether to forward or
drop an event or trap based on the match criteria.
Filters are configured in the filter filter-id context and then applied to a log in the log-id log-id
context. Only events for the configured log source streams destined to the log ID where the filter is
applied are filtered.
7210 SAS-E OS System Management Guide
Values
cflash-id:
Values
5 — 2880
based on the time creation time of the file. The file becomes a candidate for removal once the
creation datestamp + rollover time + retention time is less than the current timestamp.
Default 12
Values 1 — 500
cf1:,
Event and Accounting Logs
Page 257