Configuring Access Options - Alcatel-Lucent 7210 SAS E OS System Management Manual

Configuring SNMP Components

Configuring Access Options

The
access
views that the user group can access. Access must be configured unless security is limited to the
preconfigured access groups and views for SNMPv1 and SNMPv2. An access group is defined by
a unique combination of the group name, security model and security level.
Use the following CLI syntax to configure access features:
CLI Syntax: config>system>security>snmp
The following displays an access configuration with the view configurations.
ALA-1>config>system>security>snmp# info
----------------------------------------------
-privacy read testview write testview notify testview
----------------------------------------------
ALA->config>system>security>snmp#
Page 162
command creates an association between a user group, a security model and the
access group
group-name
level security-level [context context-name [prefix-match]]
[read view-name-1] [write view-name-2] [notify view-name-3]
view testview subtree 1
mask ff
exit
view testview subtree 1.3.6.1.2
mask ff type excluded
exit
access group testgroup security-model usm security-level auth-no
community "public" r version both
security-model security-model security-
7210 SAS-E OS System Management Guide