Alcatel-Lucent 7210 SAS E OS System Management Manual page 277

to snmp
Syntax to snmp [size]
Context config>log>log-id log-id
Description
This is one of the commands used to specify the log ID destination. This parameter is mandatory
when configuring a log destination. This command instructs the alarms and traps to be directed to the
snmp-trap-group associated with log-id.
A local circular memory log is always maintained for SNMP notifications sent to the specified snmp-
trap-group for the log-id.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the destination or maximum size of an SNMP
or memory log needs to be modified, the log ID must be removed and then re-created.
Default
none
Parameters size — The size parameter defines the number of events stored in this memory log.
to syslog
Syntax to syslog syslog-id
Context config>log>log-id
Description This is one of the commands used to specify the log ID destination. This parameter is mandatory
when configuring a log destination.
This command instructs the alarms and traps to be directed to a specified syslog. To remain consistent
with the standards governing syslog, messages to syslog are truncated to 1k bytes.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
The to command cannot be modified or re-entered. If the destination or maximum size of an SNMP
or memory log needs to be modified, the log ID must be removed and then re-created.
Default none
Parameters
syslog-id — Instructs the events selected for the log ID to be directed to the syslog-id. The character-
7210 SAS-E OS System Management Guide
Default 100
Values
50 — 1024
istics of the syslog-id referenced here must have been defined in the config>log>syslog syslog-id
context.
Values
1 — 10
Event and Accounting Logs
Page 277