Table 27: Accounting Record Name Details - Alcatel-Lucent 7210 SAS E OS System Management Manual

Table 27: Accounting Record Name Details

Record Name
Service-ingress-octets (sio) (**)
Service-ingress-packets (sip) (*) (**)
Network-ingress-octets (nio)
Network-ingress-packets (nip)
In the 7210 SAS E model, the meters can operate in either octet or packet mode. For example,
either the octets or number of packets of the incoming traffic can be calculated. This mode is
controlled by the accounting policy enabled on the network port or SAP. The default mode in
which the counters operate is the packet mode, (the incoming traffic is counted by the number of
ingress packets). If an accounting policy is enabled (by an explicit accounting policy configuration
or a default accounting policy) on the access uplink port or SAP, and the accounting policy record
is configured as network-ingress-octets or service-ingress-octets respectively, then the incoming
traffic is calculated in octets.
Note: When the meters are operating in the octet mode, the debug and show commands for the
meters will display the statistics in octets.
7210 SAS-E OS System Management Guide
Sub-Record Field
sio svc
sap
mid
iof
oof
sip svc
sap
mid
ipf
opf
nio port
mid
iof
oof
nip port
mid
ipf
opf
Event and Accounting Logs
Field Description
SvcId
SapId
MeterId
InProfileOctetsForwarded
OutOfProfileOctetsForwarded
SvcId
SapId
MeterId
InProfilePktsForwarded
OutOfProfilePktsForwarded
PortId
MeterId
InProfileOctetsForwarded
OutOfProfileOctetsForwarded
PortId
MeterId
InProfilePktsForwarded
OutOfProfilePktsForwarded
Page 217