Configuring View Options
Use the following CLI syntax to configure view options:
CLI Syntax: config>system>security>snmp
The following displays a view configuration example:
ALA-1>config>system>security>snmp# info
----------------------------------------------
----------------------------------------------
ALA-1>config>system>security>snmp#
7210 SAS-E OS System Management Guide
view view-name subtree oid-value
mask mask-value [type {included|excluded}]
view testview subtree 1
mask ff
exit
view testview subtree 1.3.6.1.2
mask ff type excluded
exit
community "private" rwa version both
community "public" r version v2c
SNMP
Page 161