Alcatel-Lucent 7210 SAS E OS System Management Manual page 139

application6
Syntax application6 app ipv6-address
Context show>system>security>source-address
Description This command configures an application to use a source IPv6 address.
Parameters app — telnet|traceroute|ping
ipv6-address — x:x:x:x:x:x:x:x (eight 16-bit pieces)
ssh
Syntax ssh
Context show>system>security
Description
This command displays all the SSH sessions as well as the SSH status and fingerprint.
Output SSH Options Output — The following table describes SSH output fields .
7210 SAS-E OS System Management Guide
Label
SSH status
SSH Preserve Key
SSH protocol ver-
sion 1
SSH protocol ver-
sion 2
Key fingerprint
Connection
Encryption
Username
Number of SSH ses-
sions
SSH is enabled — Displays that SSH server is enabled.
SSH is disabled — Displays that SSH server is disabled.
Enabled — Displays that preserve-key is enabled.
Disabled — Displays that preserve-key is disabled.
Enabled — Displays that SSH1 is enabled.
Disabled — Displays that SSH1 is disabled.
Enabled — Displays that SSH2 is enabled.
Disabled — Displays that SSH2 is disabled.
The key fingerprint is the server's identity. Clients trying to connect to
the server verify the server's fingerprint. If the server fingerprint is not
known, the client may not continue with the SSH session since the
server might be spoofed.
The IP address of the connected router(s) (remote client).
des — Data encryption using a private (secret) key.
3des — An encryption method that allows proprietary information to
be transmitted over untrusted networks.
The name of the user.
The total number of SSH sessions.
Description
Security
Page 139