Alcatel-Lucent 7210 SAS E OS System Management Manual page 112

RADIUS Client Commands
Description This command configures the TCP port number to contact the RADIUS server.
The no form of the command reverts to the default value.
Default 1812 (as specified in RFC 2865, Remote Authentication Dial In User Service (RADIUS) )
Parameters
port — The TCP port number to contact the RADIUS server.
radius
Syntax [no] radius
Context config>system>security
Description
This command creates the context to configure RADIUS authentication on the router.
Implement redundancy by configuring multiple server addresses for each router.
The no form of the command removes the RADIUS configuration.
retry
Syntax retry count
no retry
Context config>system>security>radius
config>system>security>dot1x>radius-plcy
Description
This command configures the number of times the router attempts to contact the RADIUS server for
authentication if there are problems communicating with the server.
The no form of the command reverts to the default value.
Default 3
Parameters
count — The retry count.
server
Syntax server index address ip-address secret key [hash | hash2]
no server index
Context config>system>security>radius
Description
This command adds a RADIUS server and configures the RADIUS server IP address, index, and key
values.
Page 112
Values 1 — 65535
Values 1 — 10
7210 SAS-E OS System Management Guide