Configuring Profiles - Alcatel-Lucent 7210 SAS E OS System Management Manual

Security Configuration Procedures

Configuring Profiles

Profiles are used to deny or permit access to a hierarchical branch or specific commands. Profiles
are referenced in a user configuration. A maximum of sixteen user profiles can be defined. A user
can participate in up to sixteen profiles. Depending on the the authorization requirements,
passwords are configured locally or on the RADIUS server.
Use the following CLI commands to configure user profiles:
CLI Syntax: config>system>security
The following example displays a user profile output:
A:ALA-1>config>system>security# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-1>config>system>security#
Page 54
profile user-profile-name
default-action {deny-all|permit-all|none}
renum old-entry-number new-entry-number
entry entry-id
description description-string
match command-string
action {permit|deny}
profile "ghost"
default-action permit-all
entry 1
match "configure"
action permit
exit
entry 2
match "show"
exit
entry 3
match "exit"
exit
exit
7210 SAS-E OS System Management Guide