Table 35: Show Log Syslog Output Fields - Alcatel-Lucent 7210 SAS E OS System Management Manual

Show Commands
syslog
Syntax syslog [syslog-id]
Context show>log
Description This command displays syslog event log destination summary information or detailed information on
a specific syslog destination.
Parameters
syslog-id — Displays detailed information on the specified syslog event log destination.
Output Syslog Event Log Destination Summary Output — The following table describes the syslog
output fields.
Sample Syslog Event Log Destination Summary Output
*A:ALA-48>config>log# show log syslog
===============================================================================
Syslog Target Hosts
===============================================================================
Id
-------------------------------------------------------------------------------
2
Page 302
Values 1 — 10

Table 35: Show Log Syslog Output Fields

Label
Syslog ID
IP Address
Port
Facility
Severity Level
Below Level
Dropped
Prefix Present
Description
LogPrefix
Log-id
Ip Address
Below Level Drop
unknown
The syslog ID number for the syslog destination.
The IP address of the syslog target host.
The configured UDP port number used when sending syslog messages.
The facility code for messages sent to the syslog target host.
The syslog message severity level threshold.
A count of messages not sent to the syslog collector target because the
severity level of the message was above the configured severity. The
higher the level, the lower the severity.
Yes — A log prefix was prepended to the syslog message sent to the
syslog host.
No — A log prefix was not prepended to the syslog message sent to
the syslog host.
A text description stored in the configuration file for a configuration
context.
The prefix string prepended to the syslog message.
Events are directed to this destination.
7210 SAS-E OS System Management Guide
Description
Port Sev Level
Facility
514 info
Pfx Level