Security Controls; When A Server Does Not Respond; Table 3: Security Methods Capabilities - Alcatel-Lucent 7210 SAS E OS System Management Manual

Hide thumbs Also See for 7210 SAS E OS:
Table of Contents

Advertisement

Security Controls

Security Controls
You can configure routers to use RADIUS, TACACS+, and local authentication to validate users
requesting access to the network. The order in which password authentication is processed among
RADIUS, TACACS+ and local passwords can be specifically configured. In other words, the
authentication order can be configured to process authorization via TACACS+ first, then RADIUS
for authentication and accounting. Local access can be specified next in the authentication order in
the event that the RADIUS and TACACS+ servers are not operational.

Table 3: Security Methods Capabilities

Local
TACACS+
RADIUS
* Local commands always perform account logging using the config log command.

When a Server Does Not Respond

A trap is issued if a RADIUS + server is unresponsive. An alarm is raised if RADIUS is enabled
with at least one RADIUS server and no response is received to either accounting or user access
requests from any server.
Periodic checks to determine if the primary server is responsive again are not performed. If a
server is down, it will not be contacted for 5 minutes. If a login is attempted after 5 minutes, then
the server is contacted again. When a server does not respond with the health check feature
enabled, the server's status is checked every 30 seconds. Health check is enabled by default. When
a service response is restored from at least one server, the alarm condition is cleared. Alarms are
raised and cleared on Alcatel-Lucent's Fault Manager or other third party fault management
servers.
The servers are accessed in order from lowest to highest specified index (from 1 to 5) for
authentication requests until a response from a server is received. A higher indexed server is only
queried if no response is received, implying a lower indexed server is not available. If a response
from the server is received, no other server is queried.
Page 26
Method
Authentication
Authorization
Y
Y
Y
7210 SAS-E OS System Management Guide
Accounting*
Y
N
Y
Y
Y
Y

Advertisement

Table of Contents
loading

Table of Contents