Alcatel-Lucent 7210 SAS E OS System Management Manual page 280

Accounting Policy Commands
default
Syntax [no] default
Context config>log>accounting-policy policy-id
This command adds the designation that the accounting policy ID is the default (access or network)
accounting policy to be used with all SAPs without a specified accounting policy.
If no access accounting policy is defined on a SAP, accounting records are produced in accordance
with the default access policy. If no default access policy is created, then no accounting records will
be collected other than the records for the accounting policies that are explicitly configured.
If no network accounting policy is defined on a network port, accounting records will be produced in
accordance with the default network policy. If no network default policy is created, then no
accounting records will be collected other than the records for the accounting policies explicitly
configured.
Only one access accounting policy ID can be designated as the default access policy. Likewise, only
one network accounting policy ID can be designated as the default network accounting policy.
The record name must be specified prior to assigning an accounting policy as default.
If a policy is configured as the default policy, then a no default command must be issued before a
new default policy can be configured.
The no form of the command removes the default policy designation from the policy ID. The
accounting policy will be removed from all SAPs or network ports that do not have this policy
explicitly defined.
record
Syntax [no] record record-name
Context config>log>accounting-policy policy-id
Description
This command adds the accounting record type to the accounting policy to be forwarded to the
configured accounting file. A record name can only be used in one accounting policy. To obtain a list
of all record types that can be configured, use the show log accounting-records command.
A:ALU-7210# show log accounting-records
==========================================================
Accounting Policy Records
==========================================================
Record # Record Name
----------------------------------------------------------
1
2
Page 280
The default interval for each record type is defined in the record record-name description.
Default
As defined in the record name description.
Values
5 — 120
service-ingress-octets
service-ingress-packets
Def. Interval
5
5
7210 SAS-E OS System Management Guide