Alcatel-Lucent 7210 SAS E OS System Management Manual page 126

TCP Enhanced Authentication
Description This command enables the context to configure the TCP option number to be placed in the TCP
packet header.
receive
Syntax receive option-number
Context config>system>security>keychain>tcp-option-number
Description
This command configures the TCP option number accepted in TCP packets received.
Default 254
Parameters
option-number — Specifies an enumerated integer that indicates the TCP option number to be used in
send
Syntax send option-number
Context config>system>security>keychain>tcp-option-number
Description
This command configures the TCP option number accepted in TCP packets sent.
Default 254
Parameters option-number — Specifies an enumerated integer that indicates the TCP option number to be used in
dst-port
Syntax dst-port [tcp/udp port-number] [mask]
no dst-port
Context config>sys>sec>cpm>entry>match
Description
This command specifies the TCP/UDP port to match the destination-port of the packet.
The no form of the command removes the destination port match criterion.
Parameters
dst-port-number — Specifies the destination port number to be used as a match criteria expressed as a
mask — Specifies the 16 bit mask to be applied when matching the destination port.
Page 126
the TCP header.
Values 253, 254, 253&254
the TCP header.
Values 253, 254
decimal integer.
Values
0 — 65535 (accepted in decimal hex or binary)
7210 SAS-E OS System Management Guide